Furuno GP-1650WDF manual Customizing Your Unit, Chart Setup Options menu, 11-1, Chart Offset menu

11. CUSTOMIZING YOUR UNIT

This section describes the various options which allow you to set up your unit to suit your needs.

11.1CHART SETUP OPTIONS menu

The chart offset options menu provides three menus: chart offset, track control, and chart details.

1.Press the [MENU] key to open the main menu.

2.Press the CHART SETUP OPTIONS soft key.

CHART

SETUP

CHART OFFSET

TRACK CONTROL

CHART DETAILS

DGPS 3D RETURN

Chart setup options menu

CHART OFFSET menu

In some instances position may be off by a few minutes. For example, the position of the ship is shown to be at sea while it is in fact moored at a pier. You can compensate for this error by offsetting chart position as follows:

1.Press the [MENU] key followed by the CHART SETUP OPTIONS and CHART OFFSET soft keys.

34°	12.345' N	FROM 16.41 nm		CHART
135°	12.345' E	OS	276.9°	OFFSET
				ZOOM
				IN
				ZOOM
				OUT
				SET
				OFFSET
				RESET
				OFFSET
DGPS 3D				RETURN

Plotter display, chart offset selected

2.Use the cursor pad to place the cursor where to offset chart position.

3.Press the SET OFFSET soft key.

4.Press the RETURN soft key to finish.

To cancel chart offset, press the RESET OFFSET soft key at step 3 in the above procedure.

TRACK CONTROL menu

This menu mainly controls track color and track plotting interval. For further details see Chapter 4.

11-1