3Com MSR 50, MSR 30 manual Display bgp routing-table as-path-acl, 969

969

Table 219 Description on the fields of the display bgp routing command

Field	Description
BGP Local router	BGP Local router ID
ID
Status codes	Status codes:
	* - valid
	> - best
	d - damped
	h - history
	i - internal (IGP)
	s - summary suppressed (suppressed)
	S - Stale
Origin	i - IGP (originated in the AS)
	e - EGP (learned through EGP)
	? - incomplete (learned by other means)
Network	Destination network address
Next Hop	Next hop IP address
MED	MULTI_EXIT_DISC attribute
LocPrf	Local preference value
PrefVal	Preferred value of the route
Path	AS_PATH attribute, recording the ASs the packet has passed to avoid
	routing loops
PrefVal	Preferred value
Ogn	Origin attribute of the route, one of the following values:
	i	Indicates that the route is interior to the AS.
		Summary routes and the routes configured using the network
		command are considered IGP routes.
	e	Indicates that the route is learned via the exterior gateway
		protocol (EGP).
	?	Short for INCOMPLETE. It indicates that the origin of the route is
		unknown and the route is learned by other means.

display bgp routing-table as-path-acl

Syntax display bgp routing-table as-path-acl as-path-acl-number

View Any view

Parameters as-path-acl-number: Displays routing information permitted by the AS path ACL, which is specifies with a number from 1 to 256.

Description Use the display bgp routing as-path-aclcommand to display BGP routes permitted by an as-path ACL.

Examples # Display BGP routes permitted by AS path ACL 1.