3Com MSR 30 Info-center enable, Info-center logbuffer, Undo info-center logbuffer channel size

2434 CHAPTER 163: INFORMATION CENTER CONFIGURATION COMMANDS

info-center enable

Syntax info-center enable

undo info-center enable

View System view

Parameter None

Description Use the info-center enable command to enable information center.

Use the undo info-center enable command to disable the information center.

The system outputs information to the log host or the console only after the information center is enabled first.

By default, the information center is enabled.

Example # Enable the information center.

<Sysname> system-view

[Sysname] info-center enable

% Information center is enabled

info-center logbuffer

Syntax info-center logbuffer [ channel { channel-number channel-name } size buffersize ]

*

undo info-center logbuffer [ channel size ]

View System view

Parameter buffersize: Specifies the maximum number of log messages in a log buffer, in the range 0 to 1,024 with 512 as the default value.

channel-number: A specified channel number, in the range 0 to 9.

channel-name: Specifies a channel name, which could be a default name or one that is defined by the user. The user needs to specify a channel name first before using it as a self-defined channel name. For more information, refer to “info-center channel name” on page 2432.

Description Use the info-center logbuffer command to enable information output to a log buffer and set the corresponding parameters.

Use the undo info-center logbuffer command to disable information output to a log buffer.