3Com 9100 History, Clear session number, Disable bootp vlan name all, Disable cli-config-logging

	Common Commands 39
Table 9 Common Commands (continued)
Command	Description
enable idletimeout	Enables a timer that disconnects all sessions
	(both Telnet and console) after 20 minutes of
	inactivity. The default setting is disabled.

enable telnet {access-profile <access_profile> none} {port <tcp_port_number>}

enable web {access-profile <access_profile> none} {port <tcp_port_number>}

Enables Telnet access to the switch. By default, Telnet is enabled with no access profile, and uses TCP port 23. The none option removes any previously configured access profile assignment.

Enables web access to the switch. By default, web access is enabled with no access profile, using TCP port number 80. You must reboot the switch before this command takes effect. The none option removes any previously configured access profile assignment.

history	Displays the previous 49 commands entered
	on the switch.
clear session <number>	Terminates a Telnet session from the switch.
disable bootp vlan [<name> all]	Disables BOOTP for one or more VLANs.
disable cli-config-logging	Disables logging CLI configuration
	commands to the syslog for auditing
	purposes.
disable clipaging	Disables pausing at the end of each CLI
	screen.
disable idletimeout	Disables the timer that disconnects all
	sessions. Once disabled, console sessions
	remain open until the switch is rebooted or
	you logoff. Telnet sessions remain open until
	you close the Telnet client.
disable telnet	Disables Telnet access to the switch.
disable web	Disables Web access to the switch.
delete account <username>	Deletes a user account.
delete vlan <name>	Deletes a VLAN.
(continued)