3Com 9100 manual Show log priority, Show log config, Show memory, Show switch, Show version

112CHAPTER 8: STATUS MONITORING AND STATISTICS

Table 30 describes show commands that are used to monitor the status of the switch.

Table 30 Status Monitoring Commands

Command	Description
show log {<priority>}	Displays the current snapshot of the log. The priority
	option filters the log to display message with the selected
	priority or higher (more critical). Priorities include critical,
	emergency, alert, error, warning, notice, info, and
	debug. If not specified, informational priority messages
	and higher are displayed.
show log config	Displays the log configuration, including the syslog host
	IP address, the priority level of messages being logged
	locally, and the priority level of messages being sent to
	the syslog host.
show memory	Displays the current system memory information.
show switch	Displays the current switch information, including:
	■ sysName, sysLocation, sysContact

■

■

MAC address

Current time and time, and system uptime

■Operating environment (temperature, fans, and power supply status)

■NVRAM image information (primary/secondary image, date, time, size, version)

■NVRAM configuration information (primary/secondary configuration, date, time, size, version)

■Scheduled reboot information

■

■

■

■

■

802.1p information

System serial number and reworks indicator

Software platform

System ID

Power supply and fan status

show version	Displays the hardware and software versions currently
	running on the switch. Displays the switch serial number.