3Com 9100 manual Boot Option, Show configuration, Cancel option, Save configuration primary

Boot Option Commands 135

Boot Option	Table 38 lists the commands associated with switch boot options.
Commands
Table 38 Boot Option Commands
Command	Description
show configuration	Displays the current configuration to the terminal.
	You can then capture the output and store it as a
	file.

download bootrom <ipaddress> <filename>

download image [xmodem <ipaddress> <filename>] {primary secondary}

Downloads a BOOT ROM image from a TFTP server. The downloaded image replaces the BOOT ROM in the onboard FLASH memory.

If this command does not complete successfully it could prevent the switch from booting.

Downloads a new image by way of XMODEM using the serial port, or from a TFTP server over the network. If no parameters are specified, the image is saved to the current image. XMODEM is not supported over a Telnet session.

reboot {<date> <time> cancel}	Reboots the switch at the date and time specified.
	If you do not specify a reboot time, the reboot
	happens immediately following the command, and
	any previously scheduled reboots are cancelled. To
	cancel a previously scheduled reboot, use the
	cancel option.
save {configuration} {primary	Saves the current configuration to nonvolatile
secondary}	storage. You can specify the primary or secondary
	configuration area. If not specified, the
	configuration is saved to the primary configuration
	area.
use configuration [primary	Configures the switch to use a particular
secondary]	configuration on the next reboot. Options include
	the primary configuration area or the secondary
	configuration area.
use image [primary secondary]	Configures the switch to use a particular image on
	the next reboot.