3Com 9100 manual Commands, Example, Disable mirroring, Show mirroring

Switch 9100 Port-Mirroring 61

Port-MirroringSwitch 9100 port-mirroring commands are described in Table 17.

Commands

Table 17 Switch 9100 Port-Mirroring Configuration Commands

Command Description

enable mirroring to <port>

config mirroring add [mac <mac_address> vlan <name> port <port> vlan <name> port <port>]

config mirroring delete [mac <mac_address> vlan <name> port <port> vlan <name> port <port> all}

Dedicates a port to be the mirror output port.

Adds a single mirroring filter definition. Up to eight mirroring definitions can be added. You can mirror traffic from a MAC address, a VLAN, a physical port, or a specific VLAN/port combination.

Deletes a particular mirroring filter definition, or all mirroring filter definitions.

disable mirroring	Disables port-mirroring.
show mirroring	Displays the port-mirroring configuration.

Switch 9100 The following example selects port 3 as the mirror port, and sends all Port-Mirroringtraffic coming into or out of the switch on port 1 to the mirror port:

Example

enable mirroring port 3

config mirroring add port 1

The following example sends all traffic coming into or out of the switch on port 1 and the VLAN default to the mirror port:

config mirroring add port 1 vlan default