Switch 9100 Port Commands 57

Table 16 Switch 9100 Port Commands (continued)

Command

Description

 

 

disable learning ports <portlist>

Disables MAC address learning on one or more ports

 

for security purposes. If MAC address learning is

 

disabled, only broadcast traffic and packets destined

 

to a permanent MAC address matching that port

 

number, are forwarded. The default setting is

 

enabled.

disable ports <portlist>

Disables a port. Even when disabled, the link is

 

available for diagnostic purposes.

disable sharing <master_port>

Disables a load-sharing group of ports.

restart ports <portlist>

Resets autonegotiation for one or more ports by

 

resetting the physical link.

show ports {<portlist>} collisions

show ports {<portlist>} configuration

show ports {<portlist>} info show ports {<portlist>} packet show ports {<portlist>} qosmonitor

show ports {<portlist>} rxerrors

Displays real-time collision statistics.

Displays the port configuration.

Displays detailed system-related information.

Displays a histogram of packet statistics.

Displays real-time QoS statistics. For more information on QoS, refer to Chapter 7.

Displays real-time receive error statistics. For more information on error statistics, refer to Chapter 8.

show ports {<portlist>} stats

Displays real-time port statistics. For more

 

information on port statistics, refer to Chapter 8.

show ports {<portlist>} txerrors

Displays real-time transmit error statistics. For more

 

information on error statistics, refer to Chapter 8.

show ports {<portlist>}

Displays real-time port utilization information. Use

utilization

the [Spacebar] to toggle between packet, byte, and

 

bandwidth utilization information.

 

 

Page 57
Image 57
3Com 9100 Disable learning ports portlist, Disable ports portlist, Disable sharing masterport, Restart ports portlist