3Com 9100 manual Saving Changes, Do a Get When, Configuring a Vlan

	Saving Changes 129
Saving Changes	There are two ways to save your changes to non-volatile storage using
	the Web Interface:
	■ Select Save Configuration from the Configuration task button, Switch
	option.
	This field contains a drop-down list box that allows you to select either
	the primary or secondary configuration area. After you select the
	configuration area, click Submit to save the changes.
	For more information on the primary and secondary configuration areas,
	refer to Chapter 10.
	■ Click the Logout button.
	If you attempt to log out without saving your changes, the Web
	Interface prompts you to save your changes.
	If you select Yes, the changes are saved to the selected configuration
	area. To change the selected configuration area, you must go to the
	Configuration task button, Switch option.
Do a Get When	When configuring a VLAN using the Web Interface, prior to editing the
Configuring a VLAN	VLAN configuration, you must first click the get button to ensure that
	subsequent edits are applied to the correct VLAN. If you do not click the
	Get button and you submit the changes, the changes will be made to the
	VLAN that was previously displayed.
	If you configure a VLAN and then delete it, the default VLAN is shown in
	the VLAN name window, but the VLAN information contained in the
	lower portion of the page is not updated. Click the Get button to update
	the display.