4. Configuration Menu
DISPLAY | DESCRIPTION | DEFAULT | OPTIONS | |
|
|
|
|
|
|
| Temperature display | °C | °C or °F |
|
|
|
|
|
|
| Unoccupied mode setpoint - heat- | 10°C | 5°C to 28°C |
|
| ing (TH148LE only) 1, 2 | (50°F) | (41°F to 82°F) |
|
| Unoccupied mode setpoint - cool- | 35°C | 15°C to 35°C |
|
| ing (TH148LE only) 1, 2 | (95°F) | (59°F to 95°F) |
|
| Heating cycles per hour 2 | 4 | 2, 3, 4, 5 or 6 3 |
|
| Cooling cycles per hour 2 | 4 | 2, 3, 4, 5 or 6 4 |
1To enable the Unoccupied mode, see section 2.4.
2Use the system mode selector to switch the display between the heating parame- ter and the cooling parameter.
3For optimal heating control, use the setting that matches your system as follows: 2=30 min (steam, gravity), 3=20 min (hot water, 90%+
4The corresponding cycle lengths are: 2=30 min., 3=20 min., 4=15 min., 5=12 min., 6=10 min.
nTo access the configuration menu, press the backlight button for 3 seconds.
oTo go to the next parameter (menu item), briefly press the backlight button.
pTo modify a parameter, press . q Repeat steps 2 and 3 if necessary.
rPress the backlight button for 3 seconds to exit the configura- tion menu.
5.Technical Specifications
Power supply: 2 AA batteries
Maximum load: 1 A @ 24 Vca per output
Unoccupied load: 12 VCC / ± 10% / 20 mA
Setpoint range (heating): 5 to 28°C (41 to 82°F)
Setpoint range (cooling): 15 to 35°C (59 to 95°F)
Display range:
Storage temperature:
Temperature display resolution: 0.5°C (1°F)
Accuracy: ± 0.5°C (1°F)
Cycle length: 10, 12, 15, 20 or 30 min. (programmable)
Compressor
Dimensions: 127 mm x 75 mm x 28 mm (5 in. x 3 in. x 1 in.)
6. Warranty
Aube warrants this product, excluding battery, to be free from defects in the workmanship or materials, under normal use and ser- vice, for a period of one (1) year from the date of purchase by the consumer. If at any time during the warranty period the product is determined to be defective or malfunctions, Aube shall repair or replace it (at Aube's option).
If the product is defective,
(i)return it, with a bill of sale or other dated proof of purchase, to the place from which you purchased it, or
(ii)contact Aube. Aube will make the determination whether the product should be returned, or whether a replacement product can be sent to you.
This warranty does not cover removal or reinstallation costs. This warranty shall not apply if it is shown by Aube that the defect or mal- function was caused by damage which occurred while the product was in the possession of a consumer.
Aube's sole responsibility shall be to repair or replace the product within the terms stated above. AUBE SHALL NOT BE LIABLE FOR ANY LOSS OR DAMAGE OF ANY KIND, INCLUDING ANY INCI- DENTAL OR CONSEQUENTIAL DAMAGES RESULTING, DIRECTLY OR INDIRECTLY, FROM ANY BREACH OF ANY WAR- RANTY, EXPRESS OR IMPLIED, OR ANY OTHER FAILURE OF THIS PRODUCT. Some provinces and states do not allow the exclusion or limitation of incidental or consequential damages, so this limitation may not apply to you.
THIS WARRANTY IS THE ONLY EXPRESS WARRANTY HONEY- WELL MAKES ON THIS PRODUCT. THE DURATION OF ANY IMPLIED WARRANTIES, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PUR- POSE, IS HEREBY LIMITED TO THE
This warranty gives you specific legal rights, and you may have other rights which vary from province or state to another.
7. Service
For any questions regarding the product installation, operation or warranty, contact us at:
705 Montrichard
Canada
Tel.: (450)
Fax: (450)
Email: aube.service@honeywell.com
For more information on our products, visit us at
www.aubetech.com
TH147 and TH148LE |