SR 300 IEM G3 Wireless stereo transmitter
TECHNICAL DATA
AF output | ¼’’ (6.35 mm) stereo jack socket, | Delivery includes |
| balanced | 1 SR 300 IEM G3 rack-mount |
| | transmitter |
Temperature range | –10 °C to +55 °C | 1 NT 2–3 mains unit with one country |
Power supply | 12 V | adapter |
Current consumption | max. 350 mA | 1 Rod antenna |
Dimensions | approx. 202 mm x 212 mm x 43 mm | 1 GA 3 rack adapter |
Weight | approx. 980 g | 1 Instruction manual |
| | 1 Frequency information sheet |
| | 1 RF licensing information sheet |
| | 4 Device feet |
ARCHITECT’S
SPECIFICATIONS
The wireless stereo rack-mount transmitter shall be for use with a companion receiver as part of a wireless RF monitoring system. The transmitter shall operate within six UHF frequency ranges, each with a 42 MHz switching bandwidth: 516 – 558 MHz, 566 – 608 MHz, 626 – 668 MHz, 734 –776 MHz, 780 – 822 MHz, 823 – 865 MHz; transmission frequencies shall be 1,680 per range and shall be tun able in 25 kHz steps. The transmitter shall feature 20 fixed frequency banks with up to 16 compatible frequency presets and 6 user banks with up to 16 user programmable frequencies.
Frequency stability shall be +10 ppm at −10 °C to +55 °C (+14 °F to +131°F).
RF output power at 50 O shall be switchable between 10 mW (Low) and 30 mW (Standard).
The stereo audio input shall utilize two discrete (left/right) electronically balanced 1⁄4“ (6.3 mm) jack/XLR-3F combo sockets; the audio output shall utilize a balanced 1⁄4“ (6.3 mm) jack socket; one audio loop output shall be provided utilizing a balanced 1⁄4“
(6.3 mm) jack socket. A headphone output with headphone volume control shall be provided and shall utilize a 1⁄4“ (6.3 mm) stereo jack socket. The transmitter shall have an Ethernet port (RJ45) for remote network-based monitoring and control using the Senn heiser Wireless System Manager software. One 50 O BNC-type input socket shall be provided for connecting the antenna. Nominal/peak deviation shall be ±24 kHz/±48 kHz. The transmitter shall incorporate the Sennheiser HDX compander system and shall include a 19-kHz MPX pilot tone with a ±5 kHz deviation. The audio frequency response shall range from 25 –15,000 Hz. Maximum input level shall be +22 dBu. Total harmonic distortion (THD) at 1 mV and nominal deviation shall be < 0.9 %. Signal-to- noise ratio at nominal load and peak deviation shall be > 90 dB.
The transmitter shall be menu-driven with a backlit LC display showing the current frequency, frequency bank and channel number, metering of AF level, transmission status, transmission power, equalizer setting, input sensitivity, and lock status. An auto-lock feature shall be provided to prevent settings from being accidentally altered.
The parameters of associated receivers shall be configurable in the transmitter menu and synchronized with the receivers via an integrated infrared interface.
The transmitter shall operate on 12 V power supplied from the NT 2-3 mains unit. Power consumption shall be 350 mA.
The transmitter shall have a rugged metal housing; dimensions shall be approximately 202 x 212 x 43 mm (7.95“ x 8.35“ x 1.69“). Weight shall be approximately 980 grams (2.16 lbs). Operating temperature shall range from −10 °C to +55 °C (+14 °F to +131°F). The transmitter shall be the Sennheiser SR 300 IEM G3.
