Sennheiser manual Features, Technical Data, SR 300 IEM G3 Wireless, stereo transmitter

SR 300 IEM G3 Wireless

stereo transmitter

FEATURES

Sturdy metal housing

42 MHz bandwidth: 1680 tunable UHF frequencies for interference-free reception

Enhanced frequency bank system with up to 16 compatible frequencies

Ethernet port for connecting to the Wire- less Systems Manager (WSM) software for control via computer – this delivers a good overview of monitoring and professio- nal data management for multi-channel systems

Pilot tone squelch for eliminating RF inter- ference when transmitter is turned off

Enhanced AF frequency range

Increased range for audio sensitivity

Wireless synchronization of receiver para- meter from transmitter

User-friendly menu operation with more control options

Illuminated graphic display

Auto-Lock function avoids accidental changing of settings

HDX compander for crystal-clear sound

Mute function

Integrated 5-band graphic Equalizer

Wide range of accessories adapts the system to any requirement

Optimized PLL synthesizer and micro­ processor technology

Stereo/mono selection

Easy setup of a multi-channel system using the Easy Setup Sync function

You can only sound better if you hear yourself better. Wireless monitoring is taken to the next level of perfection with the Sennheiser G3 monitoring system. Added features of this stereo transmitter include the valuable integrated 5 band equali- zer for extra control of the sound. New pass-through sockets for the audio signal enable the audio feed from a console to be routed to other devices in the chain, simplifying setup. The enhanced audio frequency response of 25 to 15,000 Hz means the sound the performers hear is the most realistic and life-like a wireless monitor system has

ever had to offer.

TECHNICAL DATA

Frequency ranges	516 – 558, 566 – 608, 626 – 668,
	734 –776, 780 – 822, 823 – 865 MHz
Transmission frequencies	1,680 frequencies, tuneable in steps
	of 25 kHz
	20 frequency banks, each with up to
	16 factory-preset channels
	6 frequency banks with up to 16
	user programmable channels
Switching bandwidth	42 MHz
Frequency stability	±10 ppm (–10 °C to +55 °C)
Antenna output	BNC socket, 50 O
RF output power at 50 O	typ. 10/30 mW (Low/Standard),
	switchable
Modulation	wideband FM stereo (MPX pilot tone)
Compander system	Sennheiser HDX
Nominal/peak deviation	±24 kHz/±48 kHz
MPX pilot tone (frequency/deviation)	19 kHz/±5 kHz
AF frequency response	25 Hz to 15 kHz
AF input	2 x XLR-3/¼“ (6.3 mm) jack combo
	socket, electronically balanced
Max. input level	+22 dBu
THD (at 1 kHz and nominal deviation)	< 0.9 %
Signal-to-noise ratio
at nominal load and peak deviation	> 90 dB
	Continued on page 2