3Com 9100 manual Simple Network Management Protocol Snmp

16CHAPTER 1: SWITCH 9100 OVERVIEW

■Controls traffic (including broadcasts)

■Provides extra security

■Protocol-sensitive filtering for VLANs

■Responds to 802.3x flow-control messages

■Autonegotiation to IEEE 802.3z for Gigabit Ethernet

■Load sharing on multiple ports

■Spanning Tree Protocol (STP) (IEEE 802.1d) with multiple STP domains

■Multiple spanning trees (64)

■IGMP snooping to control IP multicast traffic

■SuperStack II architecture

■Integrated network management

■19-inch rack or free-standing mounting

■Agent support

■Simple Network Management Protocol (SNMP)

■Remote Monitoring (RMON) groups 1 to 4 — statistics, history, alarms, and events

■Repeater and Bridge Management Information Base (MIB)

■Easy software upgrades

■BOOTP for automatic Internet Protocol (IP) address configuration

■Local management

■Console command-line interface (CLI) connection

■

■

■

Telnet CLI connection

Web-based management interface

Traffic mirroring for all ports

Port Connections The Switch 9100 has six autosensing 100/1000BASE-TX ports with standard RJ-45 connectors, and supports two 1000BASE-SX ports using standard MT-RJ connectors. You can connect other 100/1000BASE-TX devices (such as 100 Mbps or 100/1000 Mbps switches or modules) to the Switch 9100. You can also connect Switch 9100 devices to each other.