3Com 9100 manual Lithium Battery

Important Safety Information 139

■This unit operates under SELV (Safety Extra Low Voltage) conditions according to IEC 950. The conditions are only maintained if the equipment to which it is connected also operates under SELV conditions.

■France and Peru only:

This unit cannot be powered from IT† supplies. If your supplies are of IT type, this unit must be powered by 230V (2P+T) via an isolation transformer ratio 1:1, with the secondary connection point labelled Neutral, connected directly to earth (ground).

†Impédance à la terre.

■U.K. only:

The Switch 9100 is covered by Oftel General Approval, NS/G/12345/J/100003, for indirect connection to a public telecommunications system. This can only be achieved using the console port on the unit and an approved modem.

WARNING: RJ-45 Ports. These are shielded RJ-45 data sockets. They cannot be used as telephone sockets. Only connect RJ-45 data connectors to these sockets.

Either shielded or unshielded data cables with shielded or unshielded jacks can be connected to these data sockets.

WARNING: Fiber Optic ports – Optical Safety

Never look at the transmit laser while it is powered-up. Never look directly at the fiber TX port and fiber cable ends when they are powered-up.

WARNING: Use of controls or adjustments of performance or procedures other than those specified herein may result in hazardous laser emissions.

Lithium Battery

The battery in the bq4830/DS1644 device is encapsulated and not user-replaceable.