3Com 9100 manual Command Description

38 CHAPTER 3: ACCESSING THE SWITCH

Table 9 Common Commands (continued)

Command	Description
create vlan <name>	Creates a VLAN.
config account <username> {encrypted}	Configures a user account password.
{<password>}	Passwords must have a minimum of four
	characters and can have a maximum of 12
	characters. User names and passwords are
	case-sensitive.
config banner	Configures the banner string. You can enter
	up to 24 rows of 80-column text that is
	displayed before the login prompt of each
	session. Press [Return] at the beginning of a
	line to terminate the command and apply the
	banner. To clear the banner, press [Return] at
	the beginning of the first line.
config time <date> <time>	Configures the system date and time. The
	format is as follows:
	mm/dd/yyyy hh:mm:ss
	The time uses a 24-hour clock format. You
	cannot set the year past 2023.
config timezone <gmt_offset> {autodst	Configures the time zone information to the
noautodst}	configured offset from GMT time. The format
	of gmt_offset is +/- minutes from GMT
	time. Specify:
	■ autodst — Enables automatic Daylight
	Savings Time change.
	■ nosautodst — Disables automatic
	Daylight Savings Time change.
	The default setting is autodst.
config vlan <name> ipaddress	Configures an IP address and subnet mask
<ip_address> {<mask>}	for a VLAN.
disable autodst	Disables automatic Daylight Savings Time
	change.
enable autodst	Enables automatic Daylight Savings Time
	change.
enable bootp vlan [<name> all]	Enables BOOTP for one or more VLANs.
enable cli-config-logging	Enables logging CLI configuration commands
	to the syslog for auditing purposes.
enable clipaging	Enables pausing at the end of each CLI
	screen, allowing you to use a scripting
	language to get switch status.

(continued)