3Com 9100 Configuring Management Access, Unconfig switch all, Show banner, 3C177052, 3C1770518#

40 CHAPTER 3: ACCESSING THE SWITCH

Table 9 Common Commands (continued)

Command	Description
unconfig switch {all}	Resets all switch parameters (with the
	exception of defined user accounts, and date
	and time information) to the factory defaults.
	If you specify the keyword all, the user
	account information is reset as well.
show banner	Displays the user-configured banner.

Configuring

Management

Access

The Switch 9100 supports the following two level levels of management:

■User

■Administrator

A user-level account has viewing access to all manageable parameters, with the exception of the following:

■User account database

■SNMP community strings

A user-level account can use the ping command to test device reachability, and change the password assigned to the account name. If you have logged on with user capabilities, the command-line prompt ends with a (>) sign. For example:

3C17705:2>

An administrator-level account can view and change all switch parameters. It can also add and delete users, and change the password associated with any account name. The administrator can disconnect a management session that has been established by way of a Telnet connection. If this happens, the user logged on by way of the Telnet connection is notified that the session has been terminated.

If you have logged on with administrator capabilities, the command-line prompt ends with a (#) sign. For example:

3C17705:18#

The prompt text is taken from the SNMP sysname setting. The number that follows the colon indicates the sequential line/command number.