3Com MSR 50, MSR 30 manual Databits 5 6 7, Undo databits

2453

<Sysname> system-view

[Sysname] user-interface vty 0

[Sysname-ui-vty0] authentication-mode none

#Set to use password authentication when users use VTY 0 interface to log onto the device. The authentication password is 321.

<Sysname> system-view

[Sysname] user-interface vty 0

[Sysname-ui-vty0] authentication-mode password

[Sysname-ui-vty0] set authentication password cipher 321

#Set to use username and password authentication when users use VTY 0 interface to log onto the device. The username is 123 and the authentication password is 321.

<Sysname> system-view [Sysname] user-interface vty 0

[Sysname-ui-vty0] authentication-mode scheme

[Sysname-ui-vty0] quit [Sysname] local-user 123

[Sysname -luser-123] password cipher 321 [Sysname -luser-123] service-type telnet level 3

databits

Syntax	databits { 5 6 7 8 }
	undo databits
View	User interface view
Parameter	5: Five data bits.
	6: Six data bits.
	7: Seven data bits.
	8: Eight data bits.
Description	Use the databits command to set data bits on the user interface.
	Use the undo databits command to restore the default, or eight bits.

n The command is only applicable to asynchronous serial interfaces including AUX and Console ports.

Example # Set data bits to 5.

<Sysname> system-view [Sysname] user-interface aux 0 [Sysname-ui-aux0] databits 5