3Com MSR 30, MSR 50 manual Debugging bgp update ipv4, Ip-prefix-name receive send verbose

1026 CHAPTER 73: BGP DEBUGGING COMMANDS

Table 230 Description on the fields of the debugging bgp update command

Field Description

afi = 196(l2vpn) safi = 128(l2vpn)

Address family is 196. Sub-address family is 128 (L2VPN).

afi = 155(vpls) safi = 128(vpls)

Address family is 155. Sub-address family is 128 (VPLS).

Examples For details, refer to the Update message debugging information for specific parameters.

debugging bgp update ipv4

Syntax	debugging bgp update ipv4 [ peer { ipv4-addressipv4-group-name} ip-prefix
	ip-prefix-name] [ receive send ] [ verbose ]
	undo debugging bgp update ipv4 [ peer { ipv4-addressipv4-group-name}
	ip-prefix ip-prefix-name] [ receive send ] [ verbose ]
View	User view
Default Level	1: Monitor level
Parameters	peer { ipv4-address ipv4-group-name}: Enables/disables BGP IPv4 update
	debugging for the specified IPv4 peer/peer group.
	ip-prefixip-prefix-name: Filters the output message debugging information with
	the specified IP prefix list.
	receive: Enables/disables debugging for received BGP updates.
	send: Enables/disables debugging for sent BGP updates.
	verbose: Displays detailed debugging information.
Description	Use the debugging bgp update ipv4 command to enable debugging for BGP
	Update messages.
	Use the undo debugging bgp update ipv4 command to disable debugging
	for BGP Update messages.
	By default, this debugging is disabled.
	Enabling debugging may affect system performance; therefore, use this command
	only when necessary and disable debugging once the debugging operation is
	complete.
Examples	# Device A and Device B have established an IPv4 peer relationship. Enable
	debugging for BGP Update messages.
	<Sysname> debugging bgp update ipv4
	*Sep 4 16:08:20:458 2006 Sysname RM/6/RMDEBUG: