3Com MSR 50, MSR 30 manual Display mpls static-lsp, 1533

1533

Description Use the display mpls route-statecommand to display route related information.

With no VPN instance specified, the command displays route related information of the public network.

With the dest-addrdest-maskarguments not specified, the command displays all route related information.

Example # Display all route related information.

<Sysname>	display mpls route-state
DEST/MASK	NEXT-HOP	OUT-INTERFACE STATE LSP-COUNT VPN-INDEX

-----------------------------------------------------------------

1.1.1.1/32 10.0.0.1	Ser2/0	ESTA 1	0
Table 383 Description on the fields of the display mpls route-state command
Field		Description
DEST/MASK		Destination address and mask of the route
NEXT-HOP		Next hop on the route
OUT-INTERFACE		Outgoing interface of the route
STATE		Status of the route
LSP-COUNT		Number of LSPs
VPN-INDEX		Index number of the VPN instance

display mpls static-lsp

Syntax display mpls static-lsp[ lsp-namelsp-name ] [ { exclude include } dest-addr mask-length ] [ verbose ]

View Any view

Parameter lsp-name: Name for the LSP, a string of 1 to 15 characters. exclude: Excludes the specified FEC.

include: Includes the specified FEC.

dest-addr: Destination IP address of the FEC.

mask-length: Length of the mask for the destination IP address, in the range 0 to 32.

verbose: Displays detailed information.

Description Use the display mpls static-lspcommand to display information about static LSPs.

Related command: display mpls lsp, display mpls statistics lsp.