3Com MSR 50, MSR 30 manual Backup Center Configuration Commands, Display standby flow

BACKUP CENTER CONFIGURATION

145 COMMANDS

display standby flow

Syntax display standby flow

View Any view

Parameter None

Description Use the display standby flow command to display statistics about traffic on the main interfaces participating in load sharing.

Example # Display statistics about the traffic on the main interfaces participating in load sharing.

<Sysname> display standby flow Interfacename : Serial2/0 Flow-interval(s) : 100 LastInOctets : 868168 LastOutOctets : 1818667 InFlow(Octets) : 50070 OutFlow(Octets) : 100088 BandWidth(b/s) : 9000 UsedBandWidth(b/s) : 8000

Table 582 Description on the fields of the display standby flow command

Field	Description
Interfacename	Name of the main interface
Flow-interval(s)	Intervals for checking traffic on the main interface
LastInOctets	Sum of the octets received on the main interface until the last
	check
LastOutOctets	Sum of the octets sent on the main interface until the last check
InFlow(Octets)	Sum of the octets received on the main interface during the last
	interval
OutFlow(Octets)	Sum of the octets sent on the main interface during the last
	interval
BandWidth(b/s)	Bandwidth of the main interface
UsedBandWidth(b/s)	Actual bandwidth for the main interface participating in load
	sharing during the last interval