112 Cyclades® ACS 5000 Installation/Administration/User Guide
Access
Under Ports - Physical Ports in Expert Mode, select one or more serial ports and click Modify Port(s). Select Access form from the tabbed menu. The Access form appears.
The following table describes the menu and fields on the Access form.
Table 9.4: Access Form Menu and Fields
FieldDescription
Authorized Users/Groups
Type
BidirectionLogin Timeout
BidirectionShell Command
Restrict or deny access to a serial port by specifying one or more users or groups.
You can deny access to one or more users or groups by entering an exclamation point (!) before the user or group name.
For example, to explicitly deny access to a user called noadmin and enable access only to a single user called johnd you would enter the following:
!noadmin,johnd. Successive names are separated by a comma.
Select an authentication type for the serial port from the
NOTE: Authentication type None is not a valid option when the serial port is configured for Power Management connection protocol. The system defaults to Local if no authentication type is selected.
Configure the time for the serial port to return to idle state, if the username is not typed in the terminal after the login banner is displayed. The default timeout value is 60 seconds.
This field is available only when a Bidirectional Telnet protocol is selected from Ports - Physical Ports - General - Connection Protocol.
Specify the menu shell command in this field, for example, /bin/menush and build a custom menu for the TS profile using the web manager, Applications - Terminal Profile Menu form.
This field is available only when a Bidirectional Telnet protocol is selected from Ports - Physical Ports - General - Connection Protocol.
To configure user access to serial ports:
Use this procedure if you wish to specify a list of authorized users or groups.
1. Go to Ports - Physical Ports in Expert mode and select a port or ports to modify.
