Chapter 1: Introduction 5

Table 1.2: Authentication Methods Supported

Authentication Type

Definition

None

No authentication.

DSView

Authentication is performed with a DSView® 3 server.

DSView/Local

DSView management software authentication is tried first, then Local.

DSViewDownLocal

Local authentication is performed only if the DSView 3 server is down.

Kerberos

Authentication is performed using a Kerberos server.

Kerberos/Local

Kerberos authentication is tried first, switching to Local if unsuccessful.

KerberosDownLocal

Local authentication is performed only when the Kerberos server is down.

LDAP

Authentication is performed against an LDAP database using an LDAP server.

LDAP/Local

LDAP authentication is tried first, switching to Local if unsuccessful.

LDAPDownLocal

Local authentication is performed only when the LDAP server is down.

LDAPDownLocal/Radius

Local authentication is performed only when the LDAP server is down, switching to

Radius if unsuccessful.

 

Local

Authentication is performed locally. For example using the /etc/passwd file.

Local/Radius

Authentication is performed locally first, switching to Radius if unsuccessful.

Local/TACACS+

Authentication is performed locally first, switching to TACACS+ if unsuccessful.

Local/NIS

Authentication is performed locally first, switching to NIS if unsuccessful.

NIS

NIS authentication is performed.

NIS/Local

NIS authentication is tried first, switching to Local if unsuccessful.

NISDownLocal

Local authentication is performed only when the NIS server is down.

OTP

Uses the one time password (OTP) authentication method.

OTP/Local

Uses the local password if the OTP password fails.

Radius

Authentication is performed using a Radius authentication server.

Radius/Local

Radius authentication is tried first, switching to Local if unsuccessful.

RadiusDownLocal

Local authentication is performed only when the Radius server is down.

TACACS+

Authentication is performed using a TACACS+ authentication server.

TACACS+/Local

TACACS+ authentication is tried first, switching to Local if unsuccessful.

TACACS+DownLocal

Local authentication is tried only when the TACACS+ server is down.

Page 13
Image 13
Avocent ACS 5000 manual Authentication Methods Supported, Authentication Type Definition