148Cyclades® ACS 5000 Installation/Administration/User Guide

CAUTION: Do not push any objects through the openings of the Cyclades ACS 5000 advanced console server.

Doing so can cause fire or electric shock by shorting out interior components.

Zur Vermeidung von Brandgefahr oder elektrischen Schlägen bitte keine Gegenstände durch die Öffnungen des Cyclades ACS 5000 stecken.

CAUTION: Keep your Cyclades ACS 5000 advanced console server away from heat sources and do not block

host’s cooling vents.

Der Cyclades ACS 5000 muss vor Hitzequellen geschützt werden und die Lüfterausgänge dürfen nicht blockiert sein.

CAUTION: This unit has one or two power supply cords. Disconnect the power supply cord before servicing to

avoid electric shock.

Cet appareil comporte un ou deux cordon d’alimentations. Afin de prévenir les choc électriques, debrancer les cordons d’alimentation avant de fairt le dépannage.

Das Geraet hat entweder ein oder zwei Netzverbindungen. Um elektrischen Schlag zu vermeiden muessen die Netzverbindungen getrennt sein bevor Wartungsarbeiten vorgenommen werden.

Working inside the console server

Do not attempt to service the console server yourself, except when following instructions from Avocent Technical Support personnel. In the latter case, first take the following precautions:

1.Turn the console server off.

2.Ground yourself by touching an unpainted metal surface on the back of the equipment before touching anything inside the unit.

Electrostatic Discharge (ESD) Precautions

When handling any electronic component or assembly, you must observe the following antistatic precautions to prevent damage.

Always wear a grounded wrist strap when working around printed circuit boards,

Treat all assemblies, components and interface connections as static-sensitive,

Avoid working in carpeted areas and

Keep body movement to a minimum while removing or installing boards to minimize the buildup of static charge.

Page 156
Image 156
Avocent ACS 5000 manual Working inside the console server, Electrostatic Discharge ESD Precautions