3Com MSR 50, MSR 30 Vrrp method, Syntax vrrp method real-mac virtual-mac Undo vrrp method, 2229

2229

View Interface view

Parameter virtual-router-id: VRRP standby group number, in the range 1 to 255.

simple: Plain text authentication mode.

md5: Authentication header (AH) authentication using the MD5 algorithm.

key: Authentication key, case sensitive.

■When simple authentication applies, the authentication key is in plain text with a length of 1 to 8 characters.

■When md5 authentication applies, the authentication key is in MD5 ciphertext or in plain text and the length of the key depends on its input format. If the key is input in plain text, its length is 1 to 8 characters, such as 1234567; if the key is input in ciphertext, its length must be 24 characters, such as _(TT8F]Y5SQ=^Q‘MAF4<1!!.

Description Use the vrrp vrid authentication-modecommand to configure authentication mode and authentication key for the VRRP standby groups to send and receive VRRP packets.

Use the undo vrrp vrid authentication-mode command to restore the default.

By default, authentication is disabled.

Note that:

■Before executing the command, create a standby group on an interface and configure the virtual IP address of the standby group.

■You may configure different authentication types and authentication keys for the standby groups on an interface. However, the members of the same standby group must use the same authentication mode and authentication key.

Example # Set the authentication mode and authentication key for VRRP standby group 1 on interface Ethernet 1/0 to send and receive VRRP packets.

<Sysname> system-view

[Sysname] interface ethernet 1/0

[Sysname-Ethernet1/0] vrrp vrid 1 virtual-ip 10.1.1.1

vrrp method

Syntax vrrp method { real-mac virtual-mac }

undo vrrp method

View System view