3Com MSR 30 manual Debugging for the specified IPv6 peer/peer group, For IPv6 BGP update messages

1028 CHAPTER 73: BGP DEBUGGING COMMANDS

View	User view
Default Level	1: Monitor level
Parameters	peer { ipv6-address ipv6-group-name}: Enables/disables BGP IPv6 update
	debugging for the specified IPv6 peer/peer group.
	ip-prefixip-prefix-name: Filters the output message debugging information with
	the specified IP prefix list.
	receive: Enables/disables debugging for received BGP packets.
	send: Enables/disables debugging for sent BGP packets.
	verbose: Displays detailed debugging information.
Description	Use the debugging bgp update ipv6 command to enable debugging for IPv6
	BGP Update messages.
	Use the undo debugging bgp update ipv6 command to disable debugging
	for IPv6 BGP update messages.
	Enabling debugging may affect system performance; therefore, use this command
	only when necessary and disable debugging once the debugging operation is
	complete.
	By default, this debugging is disabled.
Examples	# Device A and Device B have established an IPv6 BGP peer relationship. Enable
	debugging for IPv6 BGP update messages.
	<Sysname> debugging bgp update ipv6
	%Sep	4 16:17:20:642 2006 Sysname RM/3/RMLOG:
	BGP.: 100::2 State is changed from OPENCONFIRM to ESTABLISHED.
	*Sep	4 16:17:20:642 2006 Sysname RM/6/RMDEBUG:
		BGP.: Send UPDATE to 100::2 for following destinations :
		Origin	: Incomplete
		AS Path	:
		Next Hop	: 100::1
		Local Pref	: 100
		MED	: 0
		11::11/128,
	*Sep	4 16:17:20:642 2006 Sysname RM/6/RMDEBUG:
		BGP.: Send UPDATE to 100::2 for following destinations :
		Origin	: Incomplete
		AS Path	:
		Next Hop	: 100::1
		Local Pref	: 100
		MED	: 0
		100::/64,
	*Sep	4 16:17:20:708 2006 Sysname RM/6/RMDEBUG:
		BGP_IPV6.: Recv UPDATE from peer 100::2 with following destinations :
		Update message length : 86
		Local Pref	: 100