811

Description Use the display ip policy-based-routecommand to display all system and interface policy routing information.

Examples # Display all system and interface policy routing information.

<Sysname> display ip policy-based-route

Policy Name

interface

pr02

local

pr02

Virtual-Template0

pr01

Ethernet 1/0

Table 165 Description on fields of the display ip policy-based-route command

 

 

Field

Description

 

 

local

System policy routing.

pr02

Name of the policy.

Virtual-Template0

Indicates that the policy named pr02 is applied to interface

 

Virtual-template0.

Ethernet1/0

Indicates that the policy named pr01 is applied to interface

 

Ethernet1/0.

 

 

display ip policy-based-route setup

Syntax display ip policy-based-route setup { policy-name interface interface-type interface-number local }

View Any view

Parameters policy-name: Displays policy routing information about the specified policy. A policy name is a string of 1 to 19 characters.

interface interface-typeinterface-number: Displays the configuration of policy routing enabled on the interface specified by the argument interface-typeinterface-number.

local: Displays the configuration of enabled system policy routing.

Description Use the display ip policy-based-route setup command to display the configuration of enabled policy routing.

Examples # Display the configuration of policy routing enabled on interface Ethernet1/0.

<Sysname> display ip policy-based-route setup interface ethernet 1/0 Interface Ethernet1/0 policy based routing configuration information:

policy-based-route pr01 permit node 1

if-match acl 3101

apply output-interface Ethernet1/0

Table 166 Description on fields of the display ip policy-based-route setup command

Field

Description

Interface Ethernet1/0 policy based routing configuration information

Configuration information of policy routing enabled on interface Ethernet1/0

Page 811
Image 811
3Com MSR 50, MSR 30 manual Display ip policy-based-route setup, 811