3Com MSR 50, MSR 30 manual Is-name map, Is-snmp-traps enable, Undo is-name map sys-id, 1075

1075

is-name map

Syntax is-name map sys-id map-sys-name

undo is-name map sys-id

View IS-IS view

Parameters sys-id: System ID or a pseudonode ID of a remote IS.

map-sys-name: Specifies a name for the remote IS, a string of 1 to 64 characters.

Description Use the is-name map command to map a name to a remote IS. Each remote IS system ID corresponds to only one name.

Use the undo is-name map command to remove the configuration.

By default, no name is configured for a remote IS.

Examples # Map the name RUTB to the remote IS 0000.0000.0041.

<Sysname> system-view

[Sysname] isis

[Sysname-isis-1] is-name map 0000.0000.0041 RUTB

is-snmp-traps enable

Syntax is-snmp-traps enable

undo is-snmp-traps

View IS-IS view

Parameters None

Description Use the is-snmp-traps enable command to enable the SNMP Trap function of IS-IS.

Use the undo is-snmp-trapscommand to disable this function.

SNMP Trap is enabled by default.

Examples # Enable SNMP Trap.

<Sysname> system-view

[Sysname] isis

[Sysname-isis-1] is-snmp-traps enable