3Com MSR 50 Isdn Configuration Commands, Dialer isdn-leased Isdn BRI interface view, Modules

37

ISDN CONFIGURATION COMMANDS

dialer isdn-leased (ISDN BRI interface view)

Syntax	dialer isdn-leased { 128k number }
	undo dialer isdn-leased { 128k number }
View	ISDN BRI interface view
Parameter	128k: 128 kbps ISDN leased line connection.
	number: 64 kbps ISDN leased line connection. It can be 0 for the first B channel or
	1 for the second B channel.
Description	Use the dialer isdn-leased 128k command to configure 128 kbps leased line
	connection.
	Use the undo dialer isdn-leased 128k command to remove 128 kbps leased
	line connection.
	Use the dialer isdn-leasednumber command to configure 64 kbps leased line
	connection.
	Use the undo dialer isdn-leasednumber command to remove 64 kbps leased
	line connection.
	By default, no ISDN leased line connection is configured.
	You must manually remove the existing leased line configuration before switching
	from single B channel leased line to 128 kbps leased line.
n	■ You cannot configure this command on the BRI interfaces provided by 2S1B
	modules.
	■ For more information about configuring ISDN leased lines on CE1/PRI and
	CT1/PRI interfaces, refer to “dialer isdn-leased (physical interface view)” on
	page 320.
Example	# Configure 128 kbps leased line connection.
	<Sysname> system-view
	[Sysname] interface bri 1/0
	[Sysname-Bri1/0] dialer isdn-leased 128k