a.The page for configuring an basic IPv4 ACL
2 describes the configuration items for creating a rule for a basic IPv4 ACL.
2.Configuration items for a basic IPv4 ACL rule
Item | Description | |
Select Access Control List (ACL) | Select the basic IPv4 ACL for which you want to configure rules. | |
Available ACLs are basic IPv4 ACLs that have been configured. | ||
| ||
|
| |
| Select the Rule ID option and type a number for the rule. | |
Rule ID | If you do not specify the rule number, the system will assign one | |
| automatically. | |
|
| |
| Select the operation to be performed for IPv4 packets matching the | |
Operation | rule. | |
∙ | ||
| ||
| ∙ | |
|
| |
| Select this option to apply the rule to only | |
Check Fragment | If you do no select this option, the rule applies to all fragments and | |
| ||
|
| |
| Select this option to keep a log of matched IPv4 packets. | |
Check Logging | A log entry contains the ACL rule number, operation for the matched | |
packets, protocol that IP carries, source/destination address, | ||
| ||
| source/destination port number, and number of matched packets. | |
|
| |
Source IP Address | Select the Source IP Address option and type a source IPv4 address | |
| 415 |