HP V1910 manual Configuring global Lldp setup, DOT3 TLV MAC/PHY

Item		Description
	Link Aggregation	Select to include the link aggregation TLV in transmitted
		LLDPDUs.
DOT3 TLV	MAC/PHY	Select to include the MAC/PHY configuration/status TLV in
	Configuration/Status	transmitted LLDPDUs.
Setting
	Maximum Frame Size	Select to include the maximum frame size TLV in transmitted
		LLDPDUs.
	Power via MDI	Select to include the power via MDI TLV in transmitted LLDPDUs.
	LLDP-MED Capabilities	Select to include the LLDP-MED capabilities TLV in transmitted
		LLDPDUs.
		Select to include the hardware revision TLV, firmware revision
	Inventory	TLV, software revision TLV, serial number TLV, manufacturer
		name TLV, model name TLV and asset ID TLV in transmitted
		LLDPDUs.

MED TLV Setting

Network Policy	Select to include the network policy TLV in transmitted LLDPDUs.
Extended Power-via-MDI	Select to include the extended power-via-MDI TLV in transmitted
Capability	LLDPDUs.
	Select to encode the emergency call number in the location
Emergency Number	identification TLV in transmitted LLDPDUs and set the emergency
	call number.
	Select Address to encode the civic address information of the
Address	network connectivity device in the location identification TLV in
	transmitted LLDPDUs. In addition, set the device type, which can
	be a DHCP server, switch or LLDP-MED endpoint, country code,
	and network device address.
	When configuring the network device address, select the
	address information type from the drop-down list, type the
	address information in the text box below and click Add next to
	the text box to add the information to the address information
Network Device Address	list below. To remove an address information entry, select the
	entry from the list, and click Delete. The civic address
	information can include language, province/state, country,
	city, street, house number, name, postal/zip code, room
	number, post office box, and if necessary, additional
	information.

Return to LLDP configuration task list.

Configuring global LLDP setup

Select Network  LLDP from the navigation tree and click the Global Setup tab to enter the page shown in a.

229