Item

Description

 

Set the maximum number of transmission attempts.

Timeout Retransmission Times

The product of the timeout value and the number of retransmission

 

attempts cannot exceed 75.

 

 

 

Set the real-time accounting interval, whose value must be n times 3

 

(n is an integer).

 

To implement real-time accounting on users, it is necessary to set the

 

real-time accounting interval. After this parameter is specified, the

 

device will send the accounting information of online users to the

Realtime-Accounting Interval

RADIUS server every the specified interval.

The value of the real-time accounting interval is related to the

 

 

requirement on the performance of the NAS and RADIUS server. The

 

smaller the value, the higher the requirement. It is recommended to

 

set a large value if the number of users is equal to or larger than

 

1000. 3 shows the relationship between the interval value and the

 

number of users.

 

 

Realtime-Accounting Packet

Set the maximum number of real-time accounting request

Retransmission Times

retransmission times.

 

 

Stop-Accounting Buffer

Enable or disable buffering stop-accounting requests without

responses in the device.

 

 

 

Stop-Accounting Packet Retransmission

Set the maximum number of transmission attempts if no response is

Times

received for the stop-accounting packet.

 

 

Quiet Interval

Specify the interval the primary server has to wait before being

active

 

 

 

 

Set the format of username sent to the RADIUS server.

 

A username is generally in the format of userid@isp-name, of which

 

isp-name is used by the device to determine the ISP domain to which

 

a user belongs. If a RADIUS server does not accept a username

 

including an ISP domain name, you can configure the device to

Username Format

remove the domain name of a username before sending it to the

 

RADIUS server.

 

without-domain: Specifies to remove the domain name of a

 

username that is to be sent to the RADIUS server.

 

with-domain: Specifies to keep the domain name of a username that

 

is to be sent to the RADIUS server.

 

 

 

Specify the unit for data flows sent to the RADIUS server, which can

 

be:

 

Unit of Data Flows

∙

byte

∙

kilo-byte

 

 

∙

mega-byte

 

∙

giga-byte