HP V1910 manual Trace route operation, Ping operation result, Trace route configuration, 304

b.Ping operation result

Trace route operation

NOTE:

The web interface supports trace route on IPv4 addresses only.

Before performing the trace route operation on the Web interface, on the intermediate device execute the ip ttl-expires enable command to enable the sending of ICMP timeout packets and on the destination device execute the ip unreachables enable command to enable the sending of ICMP destination unreachable packets.

Select Network  Diagnostic Tools from the navigation tree and then select the Trace Route tab to enter the trace route configuration page, as shown in a.

a.Trace route configuration page

304