HP V1910 PoE configuration example

∙To disable the non-standard PD detection for all PSEs, click Disable All.

Displaying information about PSE and PoE ports

Select PoE  PoE from the navigation tree to enter the page of the Summary tab. The upper part of the page displays the PSE summary. Click a port on the chassis front panel, and the configuration and power information are displayed in the lower part of the page, as shown in a.

a.PoE summary (with GigabitEthernet 1/0/1 selected)

PoE configuration example

Network requirements

∙As shown in a, GigabitEthernet 1/0/1 and GigabitEthernet 1/0/2 are connected to IP telephones.

∙GigabitEthernet 1/0/11 is connected to the AP whose maximum power does not exceed 9000 milliwatts.

∙The IP telephones have a higher power supply priority than the AP, so the PSE supplies power to IP telephones first when the PSE power is overloaded.

462