HP V1910 manual For configuring the voice Vlan function on ports, 247

c.The page for configuring the voice VLAN function on ports

∙Select Auto in the Voice VLAN port mode drop-down list.

∙Select Enable in the Voice VLAN port state drop-down list.

∙Type 2 in the Voice VLAN ID field.

∙Select ports GigabitEthernet 1/0/1 and GigabitEthernet 1/0/2 on the chassis front panel.

∙Click Apply.

#Enable LLDP on ports GigabitEthernet 1/0/1 and GigabitEthernet 1/0/2. If LLDP is enabled (the default setting), skip this step.

#Set both the LLDP operating mode and the CDP operating mode to TxRx on ports GigabitEthernet 1/0/1 and GigabitEthernet 1/0/2.

∙Select Network  LLDP from the navigation tree to enter the Port Setup tab. Select ports GigabitEthernet 1/0/1 and GigabitEthernet 1/0/2 and click Modify Selected, as shown in d. The page shown in e is displayed.

247