Creating an IPv4 static route
Select Network IPv4 Routing from the navigation tree and click the Create tab to enter the IPv4 static route configuration page, as shown in a.
a.Create an IPv4 static route
2.IPv4 static route configuration items
Item | Description |
Destination IP Address | Type the destination IP address of the static route, in dotted decimal notation. |
|
|
| Specify the mask of the destination IP address. |
Mask | Select a mask length (number of consecutive 1s in the mask) or a mask in |
| dotted decimal notation from the |
|
|
| Type a preference value for the static route. The smaller the number, the higher |
| the preference. |
Preference | For example, specifying the same preference for multiple static routes to the |
| same destination enables load sharing on the routes; specifying different |
| preferences enables route backup. |
|
|
Next Hop | Type the next hop IP address, in dotted decimal notation. |
|
|
268