Item | Description |
| Enable the switch to establish a stack. |
| After you enable the switch to establish a stack, the switch becomes the master switch |
| of the stack and automatically adds the switches connected to its stack ports to the |
Build Stack | stack. |
| IMPORTANT: |
You can delete a stack only on the master switch of the stack. The Global Settings area on a member switch is grayed out.
Return to Stack management configuration task list.
Configuring stack ports
Select IRF from the navigation tree to enter the page shown in a. You can configure stack ports in the Port Settings area.
∙Select the check box before a port name, and click Enable to configure the port as a stack port.
∙Select the check box before a port name, and click Disable to configure the port as a
Return to Stack management configuration task list.
Displaying topology summary of a stack
Select IRF from the navigation tree and click the Topology Summary tab to enter the page shown in a.
a.Topology summary
2.Fields of topology summary
Fields | Description | |
| Member ID of the device in the stack: | |
Member ID | ∙ Value 0 indicates that the switch is the master switch of the stack. | |
∙ A value other than 0 indicates that the switch is a member switch and the value | ||
| ||
| is the member ID of the switch in the stack. | |
|
| |
Role | Role of the switch in the stack: master or member. | |
|
|
Return to Stack management configuration task list.
35