HP V1910 manual Configuring an Snmp user, Return to SNMPv3 configuration task list, Agent, 123

c.Create an SNMP group

2.Configuration items for creating an SNMP group

Item	Description
Group Name	Set the SNMP group name.
	Select the security level for the SNMP group. The available security levels are:
	∙ NoAuth/NoPriv—No authentication no privacy.
Security Level	∙	Auth/NoPriv—Authentication without privacy.
	∙	Auth/Priv—Authentication and privacy.
		IMPORTANT:
	For an existing SNMP group, its security level cannot be modified.
Read View	Select the read view of the SNMP group.
	Select the write view of the SNMP group.
Write View	If no write view is configured, the NMS cannot perform the write operations to all MIB
	objects on the device.
	Select the notify view of the SNMP group, that is, the view that can send trap
Notify View	messages.

If no notify view is configured, the agent does not send traps to the NMS.

	Associate a basic ACL with the group to restrict the source IP address of SNMP
ACL	packets, that is, you can configure to allow or prohibit SNMP packets with a specific
	source IP address, so as to restrict the intercommunication between the NMS and the
	agent.

Return to SNMPv3 configuration task list.

Configuring an SNMP user

Table 35 Select Device  SNMP from the navigation tree.

Table 36 Click the User tab to enter the page as shown in b.

Table 37 Click Add to enter the Add SNMP User page, as shown in c.

123