HP V1910 manual Vct, Rmon, Snmp

Function menu			Description	User level
		Modify	Allows you to modify FTP or Telnet user	Management
			information.
		Remove	Allows you to remove an FTP or a Telnet user.	Management
		Switch To	Allows you to switch the current user level to the	Visitor
		Management	management level.
	Loopback	Loopback	Allows you to perform loopback tests on Ethernet	Configure
			interfaces.
	VCT	VCT	Allows you to check the status of the cables	Configure
			connected to Ethernet ports.
		Port Traffic	Displays the average rate at which the interface
			receives and sends packets within a specified time	Monitor
	Flow	Statistics
			interval.
	Interval
		Interval	Allows you to set an interval for collecting traffic	Configure
		Configuration	statistics on interfaces.
			Displays and allows you to set the interval for
	Storm	Storm Constrain	collecting storm constrain statistics.	Configure
	Constrain		Displays, and allows you to create, modify, and
			remove the port traffic threshold.
		Statistics	Displays, and allows you to create, modify, and	Configure
			clear RMON statistics.
		History	Displays, and allows you to create, modify, and	Configure
			clear RMON history sampling information.
	RMON	Alarm	Allows you to view, create, modify, and clear	Configure
			alarm entries.
		Event	Allows you to view, create, modify, and clear event	Configure
			entries.
		Log	Displays log information about RMON events.	Configure
	Energy	Energy Saving	Displays and allows you to configure the energy	Configure
	Saving		saving settings of an interface.
			Displays and refreshes SNMP configuration and	Monitor
		Setup	statistics information.
			Allows you to configure SNMP.	Configure
			Displays SNMP community information.	Monitor
		Community
			Allows you to create, modify and delete an SNMP	Configure
			community.
	SNMP
			Displays SNMP group information.	Monitor
		Group
			Allows you to create, modify and delete an SNMP	Configure
			group.
			Displays SNMP user information.	Monitor
		User
			Allows you to create, modify and delete an SNMP	Configure
			user.

7