Click Modify Port to enter the page for configuring the mirroring group ports, as shown in d.

d.Configure the monitor port

∙Select 1 – Local in the Mirroring Group ID drop-down list.

∙Select Monitor Port in the Port Type drop-down list.

∙Select GigabitEthernet 1/0/3 on the chassis front panel.

∙Click Apply. A configuration progress dialog box appears.

∙After the configuration process is complete, click Close in the dialog box.

Configuration guidelines

Consider the following points during local port mirroring configuration:

∙To ensure operation of your device, do not enable STP, MSTP, or RSTP on the monitor port.

∙You can configure multiple mirroring ports but only one monitor port for a local mirroring group.

81