|
|
| Replacing the Light Bulbs | |||
|
|
|
|
| ||
|
|
|
| Stainless Steel Refrigerator | ||
|
|
|
| |||
Fresh food | Setting the controls to OFF does not remove | 4 After replacing the bulb with an appliance | ||||
compartment— | power to the light circuit. | bulb of the same or lower wattage, replace | ||||
| the light shield and screws (on some models). | |||||
upper light | 1 Unplug the refrigerator. | |||||
When replacing the light shield, make sure | ||||||
| ||||||
|
| 2 The bulbs are located at the top of the | that the tabs at the back of the shield fit into | |||
|
| compartment, inside the light shield. | the slots at the back of the light shield housing. | |||
|
| On some models, a screw at the front of | 5 Plug the refrigerator back in. | |||
|
| the light shield will have to be removed. | ||||
|
|
|
|
| ||
|
| 3 To remove the light shield, press in on the |
|
|
| |
|
| tabs on the sides of the shield and slide |
|
|
| |
|
| forward and out. |
|
| Tabs | |
|
|
|
| |||
|
|
|
|
| ||
|
|
|
|
|
Fresh food | Setting the controls to OFF does not remove | ||
compartment— | power to the light circuit. | ||
|
| ||
lower light | This light is located above the top pan. | ||
|
| 1 | Unplug the refrigerator. |
|
| 2 | Remove the convertible meat drawer control |
|
|
| knob by pulling straight out. |
|
| 3 | Lift the light shield up and pull it out. |
|
| 4 | After replacing the bulb with an appliance |
|
|
| bulb of the same or lower wattage, replace the |
|
|
| shield and the knob. |
|
| 5 | Plug the refrigerator back in. |
|
|
|
|
Freezer | Setting the controls to OFF does not remove | 4 Replace the bulb with an appliance bulb of | |
compartment | power to the light circuit. | the same or lower wattage, and reinstall the | |
1 Unplug the refrigerator. | light shield. When reinstalling the light shield, | ||
| |||
| make sure the top tabs snap securely into | ||
|
| ||
| 2 Remove the shelf just above the light shield. | place. Replace the screw (on some models). | |
| (The shelf will be easier to remove if it is | 5 Reinstall the shelf and plug the refrigerator | |
| emptied first.) On some models, a screw at | ||
| back in. | ||
| the top of the light shield will need to be | ||
|
| ||
| removed. |
|
3To remove the light shield, press in on the sides, and lift up and out.
Dispenser | Setting the controls to OFF does not remove | 3 | Replace the bulb with a bulb of the same size | |
| power to the light circuit. |
| and wattage. | |
| 1 | Unplug the refrigerator. | 4 | Plug the refrigerator back in. |
| 2 | The bulb is located on the dispenser under |
|
|
|
| the control panel. Remove the light bulb by |
|
|
22
turning it counterclockwise.