Now, Switch C becomes a member switch.
#On Switch D, configure local port GigabitEthernet 1/0/1 connecting with Switch B as a stack port.
∙Select IRF from the navigation tree of Switch D to enter the page of the Setup tab.
∙In the Port Settings area, select the check box before GigabitEthernet1/0/1.
∙Click Enable.
Now, Switch D becomes a member switch. Table 17 Verify the configuration
# Display the stack topology on Switch A.
∙Select IRF from the navigation tree of Switch A and click the Topology Summary tab.
∙You can view the information as shown in f. f. Verify the configuration
Configuration guidelines
When configuring a stack, note the following issues:
Table 18 If a switch is already configured as the stack master, you are not allowed to modify the private IP address pool on the switch.
Table 19 If a switch is already configured as a stack member, the Global Settings area on the member switch is grayed out.
42