∙Select Deny as the operation action.
∙In the IP Address Filter area, select the Destination IP Address check box, and enter 10.0.0.1 in the text box.
∙Enter 0.0.0.0 in the Destination Wildcard text box.
∙Click Add to finish the operation.
Table 121 Configure the 802.1X feature.
# Enable the 802.1X feature globally.
∙From the navigation tree, select Authentication 802.1X to enter the 802.1X configuration page. l. Global 802.1X globally
∙Select the check box before Enable 802.1X.
∙Select the authentication method as CHAP.
∙Click Apply to finish the operation.
# Enable 802.1X on port GigabitEthernet 1/0/1.
∙In the Ports With 802.1X Enabled area, click Add.
348