c.Create an SNMP view (2)
Table 25 Configure the parameters of a rule and click Add to add the rule into the list box at the lower part of the page.
Table 26 Configure all rules and click Apply to create an SNMP view. Note that the view will not be created if you click Cancel.
2.Configuration items for creating an SNMP view
Item | Description | |
View Name | Set the SNMP view name. | |
|
| |
Rule | Select to exclude or include the objects in the view range determined by the MIB | |
subtree OID and subtree mask. | ||
| ||
|
| |
| Set the MIB subtree OID (such as 1.4.5.3.1) or name (such as system). | |
MIB Subtree OID | MIB subtree OID identifies the position of a node in the MIB tree, and it can uniquely | |
| identify a MIB subtree. | |
|
| |
| Set the subtree mask. | |
Subtree Mask | If no subtree mask is specified, the default subtree mask (all Fs) will be used for | |
| ||
|
|
Adding rules to an SNMP view
Table 27 Click the 
icon corresponding to the specified view on the page as shown in a, the Add rule for the view ViewDefault window appears as shown in b.
Table 28 Configure the parameters, and click Apply to add the rule for the view. 2 describes the configuration items for creating an SNMP view.
120