∙Click Apply.

# Enable the DHCP relay agent on VLAN-interface 1.

∙In the Interface Config field, click the icon of VLAN-interface 1, and then perform the following operations, as shown in d.

d.Enable the DHCP relay agent on an interface and correlate it with a server group

∙Click on the Enable radio button next to DHCP Relay.

∙Select 1 for Server Group ID.

∙Click Apply.

NOTE:

Because the DHCP relay agent and server are on different subnets, you need to configure a static route or dynamic routing protocol to make them reachable to each other.

287