f.The Global Setup tab
∙Select Enable from the LLDP Enable
∙Select Enable from the CDP Compatibility
∙Click Apply.
Configuration verification
# Display information about LLDP neighbors on Switch A.
Display information about LLDP neighbors on Switch A after completing the configuration. You can see that Switch A has discovered the Cisco IP phones attached to ports GigabitEthernet 1/0/1 and GigabitEthernet 1/0/2 and obtained their device information.
Configuration guidelines
When configuring LLDP, follow these guidelines:
Table 63 To make LLDP take effect, you must enable it both globally and on ports.
Table 64 When selecting TLVs to send in LLDPDUs, note the following:
○To advertise
○To remove the
○To remove the MAC/PHY configuration TLV, remove the
○If the
250