HP V1910 manual Voice Vlan configuration examples, 160

Voice VLAN configuration examples

Configuring voice VLAN on a port in automatic voice VLAN assignment mode

Network requirements

As shown in a,

∙Configure VLAN 2 as the voice VLAN allowing only voice traffic to pass through.

∙The IP phone connected to hybrid port GigabitEthernet 1/0/1 sends untagged voice traffic.

∙GigabitEthernet 1/0/1 operates in automatic VLAN assignment mode. Set the voice VLAN aging timer to 30 minutes.

∙Configure GigabitEthernet 1/0/1 to allow voice packets whose source MAC addresses match the OUI addresses specified by OUI address 0011-2200-0000 and mask FFFF-FF00-0000. The description of the OUI address entry is test.

a.Network diagram for automatic voice VLAN assignment mode configuration

Switch ASwitch B

	Internet
	VLAN 2
GE1/0/1		GE1/0/3
VLAN 2

010-10010755-2002 OUI: 0011-2200-0000

Mask: ffff-ff00-0000

Configuration procedure

# Create VLAN 2.

∙Select Network  VLAN from the navigation tree, and click the Create tab to enter the page shown in a.

160