![](/images/backgrounds/293017/hp-v1910-users-manual-120219143x1.png)
∙Click Apply.
# Enable the agent to send SNMP traps.
∙Click the Trap tab and enter the page as shown in h.
h.Enable the agent to send SNMP traps
∙Select the Enable SNMP Trap
∙Click Apply.
# Add the target hosts of SNMP traps.
∙Click Add to enter the page as shown in i.
i.Add target hosts of SNMP traps
∙Select the destination IP address type as IPv4.
∙Type the destination address 1.1.1.2.
∙Type the user name user1.
∙Select v3 from the Security Model
∙Click Apply.
Table 43 Configure NMS.
131