Click Modify Port to enter the page for modifying the VLANs to which a port belongs, as shown in g.
g.Assign GigabitEthernet 1/0/1 to VLAN 2 and VLANs 6 through 50 as a tagged member
∙Select GigabitEthernet 1/0/1 on the chassis front device panel.
∙Select the Tagged option in the Select membership type area.
∙Type VLAN IDs 2,
∙Click Apply. A configuration progress dialog box appears.
∙After the configuration process is complete, click Close in the dialog box. Table 45 Configure Switch B
Configure Switch B as you configured Switch A.
Configuration guidelines
When configuring the VLAN function, follow these guidelines:
∙As the default VLAN, VLAN 1 cannot be created or removed.
∙You cannot create or remove VLANs reserved for special purposes.
∙Dynamic VLANs cannot be removed on the page for removing VLANs.
∙You cannot remove a VLAN that has referenced a QoS policy.
∙To remove a remote probe VLAN for remote port mirroring, you must remove the remote probe VLAN configuration first.
148