HP V1910 manual Link aggregation group, Endpoint devices, 234

Field	Description
	Port ID type:
	∙	Interface alias
	∙	Port component
Port ID type	∙	MAC address
	∙	Network address
	∙	Interface name
	∙	Agent circuit ID
	∙	Locally assigned—Local configuration.
Port ID	The port ID value.
	The primary network function of the system:
System capabilities supported	∙	Repeater
	∙	Bridge
	∙	Router
	The network function enabled on the system:
System capabilities enabled	∙	Repeater
	∙	Bridge
	∙	Router
Auto-negotiation supported	The support of the neighbor for auto negotiation.
Auto-negotiation enabled	The enable status of auto negotiation on the neighbor.
OperMau	Current speed and duplex mode of the neighbor.
Link aggregation supported	The neighbor supports link aggregation.
Link aggregation enabled	Link aggregation is enabled on the neighbor.
Aggregation port ID	Link aggregation group ID. It is 0 if the neighbor port is not assigned to any
	link aggregation group.
Maximum frame Size	The maximum frame size supported on the neighbor port.
	MED device type:

∙ Connectivity device—An intermediate device that provide network

	connectivity.
	∙ Class I—a generic endpoint device. All endpoints that require the
	discovery service of LLDP belong to this category.
Device class	∙ Class II—A media endpoint device. The class II endpoint devices support
	the media stream capabilities in addition to the capabilities of generic
	endpoint devices.
	∙ Class III—A communication endpoint device. The class III endpoint
	devices directly support end users of the IP communication system.
	Providing all capabilities of generic and media endpoint devices, Class
	III endpoint devices are used directly by end users.

234