Configuration procedure
Table 20 Configure Device A
#Configure the local clock as the reference clock, with the stratum of 2. Enable NTP authentication, set the key ID to 24, and specify the created authentication key aNiceKey as a trusted key. (Configuration omitted.)
Table 21 Configure Switch B
# Configure Device A as the NTP server of Switch B.
∙Select Device System Time from the navigation tree, and then select the Net Time tab to perform the configurations as shown in b.
b.Configure Device A as the NTP server of Switch B
∙Select NTP.
∙Type 24 in the ID box, and type aNiceKey in the Key String text box for key 1.
∙Type 1.0.1.11 in the NTP Server 1 text box and type 24 in the Reference Key ID text box.
∙Click Apply.
Table 22 Verify the configuration
After the above configuration, you can see that the current system time on Device A is the same as Switch B.
50